Spill-Ex Skirt Sealing System
The Tega innovated SPILL-EX skirt sealing system is simple yet effective in making conveyor loading stations completely spillage free.
Side Skirt Sealing :
Skirt sealing is generally provided on both sides of the skirt board; however, for conveyors that are inclined upwards or for those handling fines, sealing of the rear of the belt is necessary.
Rear Skirt Sealing :
Rear skirt sealing is provided with a fixed length backing Skirt plate that is based on belt width. The height of the rubber blocks are 100 mm more than the standard size of the side skirt sealing to compensate for trough height.
To order, select the options mentioned here to suit specific conveyor application. In case your order does not specify these details, supply will be with Standard Model Backing Plate of Type L, using carbon Steel material and Rubber Blocks.
It is used in normal conditions where lump size is more than 30mm. The construction of ‘L’ type backing plate is shown in the image.
This type of backing skirt plate consists of an ‘I’ shaped plate. It is suitable for conveyors with lump size less than 30mm and where tonnage of conveyor belt is high, ‘I’ type backing plate should be used as shown in the image.
In this type the backing plate is ‘Z’ shaped. This type of backing plate is suitable for flat belt conveyors and for conveyors with divergent type of chute.
|Application Area : Loading Zone of belt conveyor|
|Segmented type soft & special wear resistant rubber block||Fits easily to existing or new conveyor systems & ensure long life|
|Segmented rubber block are supported firmly between backing plate & serrated clamp||Soft but firm contact gives complete sealing|
|Laterally guided segmented rubber blocks & specially designed serrated clamps||Conforms the lateral movement of the block can be adjusted to the contour of the belt|
|Specially developed rubber compound||Ensures smooth running without belt damage|
|Individual replaceable blocks||Substantial cost saving|