Friflo Impact Pad
The Tega Friflo Impact Pad is a fusion of three different layers. The top layer is made of UHMWPE – for smooth gliding of the conveyer belt. The middle layer is a made of rubber – to cushion the impact load, while the lower layer is for fastening impact pads on the support frame, which is usually made of aluminum.
Type ‘H’
This is a pad with ‘H’ type reinforcement and clamping of this pad is done with ‘H’ type aluminum clamps, hexagonal headed bolts, nylock nuts & washers. |
![]() H -Type Impact Pad |
Type ‘P’
The ‘P’ type pads do not contain any reinforcement & is clamped with ‘P’ type aluminum clamps, hexagonal headed bolts, nylock nuts & washers. |
![]() P -Type Impact Pad |
Type ‘T’
This pad having ‘T’ type reinforcement and clamping is done with square headed ‘T’ bolts, Nylock nuts & washers. |
![]() T -Type Impact Pad |
Support Frame / Cradle
Support Frame / Cradle :Support frames are designed to suit a wide range of applications for impact pad.
Light duty:
In low or negligible impact areas light duty support frame is provided. Installation of impact pads to be done on existing idler frames, using only a retrofitting support base.

Medium Duty:
In areas where the impact load on the belt is not severe, the bolted type adjustable medium duty support frame is provided.

Heavy Duty:
The heavy duty sturdy pads are fixed over an equally robust heavy duty bolted type adjustable support frame to absorb high impact load. For extra heavy duty and custom designed support frames are also available on request.

Rows of Pad Required for Each Loading Station
Belt width (mm) | 600/650 | 750/800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 |
No. of Rows | 6 | 7 | 9 | 10 | 12 | 14 | 15 | 17 | 19 | 20 |
Application Area
Application Area : Loading Zone of belt conveyor | |
Features | Benefits |
No revolving parts | Regular maintenance. & lubrication not required |
More belt contract area | No under cutting & damage of belt |
Continuous support under the belt | Reduces spillage at loading zone |
High wear resistant UHMWPE top layer | Long service life |
Fastening-independent pad construction | Improved impact energy absorption |