We have made a commitment to create value for our customers throughout the world by bringing them innovative technologies, products and services in our core business.
Our
Products
Tracker Roller
Category :-Conveying
Application area :-
Mis-tracking of belt
Description:-"
One of the biggetst challenges facing any manufacturer of belt-tracking and training systems is that no two conveyor set-ups are alike. The ideal tracker must be versitile enough to work accross different belt types and environments and in both wet and dry conditions.
Products:-
1)Flat Return Tracker- * Vibration free rolling action * Simple design * No contact with edge of belt * Operates in all conditions * Operates on reversible belts * Can be installed inside or underneath belt
2)Trough Tracker roller * Easy installation * Low maintenance * Vibration free rolling ac...
Features:-
Operates in both dry and wet conditions.
Requires minimum force to activate the the tracking mechanism.
Maintanence free.
Vibration free rolling action.
Simple to install
Operates in both dry and wet conditions.Requires minimum force to activate the the tracking mechanism.Maintanence free.Vibration free rolling action.Simple to install
Spill-Ex Universal Support System
Category :-Conveying
Application area :-
Loading Zone , Belt support handling fines with high capacity
Description:-"
The Spill-Ex Universal Support System is effective to control belt sagging between the idlers and thus improve the performance of the skirt board sealing system. The support system is of Universal type which is fully adjustable to suit different belt widths, trough angles and conveyor profile encountered at various material handling site.
It consists of : A) Two support bars made of UHMWPE, which has a very low coefficient of friction. This provides a very smooth supporting surface for the belt to slide on. B) An arrangement to adjust the portion of the support bars with respect to ...
Features:-
Each support bar is mounted on the swivel support by means of clamps.
The swivel support is locked with the adjustable support at any desired troughing angle.
The adjustable support can slide up or down in the sliding clamp and can be set in a desired position.
High wear resistant resistant UHMWPE top layer.
Each support bar is mounted on the swivel support by means of clamps.The swivel support is locked with the adjustable support at any desired troughing angle.The adjustable support can slide up or down in the sliding clamp and can be set in a desired position.High wear resistant resistant UHMWPE top layer.
Skirt Board Sealing System
Category :-Conveying
Application area :-
Loading Zone
Description:-"
Side Skirt Sealing
Tega innovated the SPILL-EX skirt sealing system, is simple yet effective in making conveyor loading stations completely spillage free.
Rear Skirt Sealing
Skirt sealing is generally provided on both side of skirt board, however, for conveyors inclined upward or for those handling fines, the sealing of the rear of the belt is neccessary. rear skirt sealing is provided with a fixed length backing plate i.e. based on belt width. The height of the rubber blocks are increased by 100 mm than the standard size of side skirt sealing to compensate for trough height.
...
Features:-
Segmented type soft & special wear resistant rubber block.
Segmented rubber block are supported firmly between backing plate & serrated clamp.
Laterally guided segmented rubber blocks & specially designed serrated clamps.
Specially developed rubber compound.
Individual replaceable blocks.
Segmented type soft & special wear resistant rubber block.Segmented rubber block are supported firmly between backing plate & serrated clamp.Laterally guided segmented rubber blocks & specially designed serrated clamps.Specially developed rubber compound.Individual replaceable blocks.
Friflo Impact Pads
Category :-Conveying
Application area :-
Loading Zone
Description:-"
The Tega Friflo Impact Pad is a fusion of three different layers. The top layer is made of UHMWPE - for smooth gliding of the conveyer belt. The middle layer is of rubber - to cushion the impact load , while the lower layer is for fastening impact pads on the support frame, which is usually made of aluminium.
Type 'H'
This is a pad with 'H' type reinforcement and clamping of this pad is done with 'H' type aluminium clamps, hexagonal headed bolts, nylock nuts & washers.
Type 'P'
The 'P' type pads do not contain any reinforcement &...
Features:-
No revolving parts.
More belt contract area.
Continuous support under the belt.
High wear resistant UHMWPE top layer.
Fastening-independent pad construction.
No revolving parts.More belt contract area.Continuous support under the belt.High wear resistant UHMWPE top layer.Fastening-independent pad construction.
Ceramic Pulley Lagging
Category :-Conveying
Application area :-
Belt Slippage
Description:-"Logging of the conveyor pulley is essential to improve conveyor belt performance. The use of lagging reduces belt slippage , improve tracking and extends life of belt, bearing & other components.
Tega Ceramic Pulley Logging is specially suited for pulleys where slippage and excessive wear & tear problems which make normal rubber lagging ineffective. Tega ceramic pulley lagging widely used on the drive pulleys, can also be used on snub, bend and tail pulleys. This innovative new product incorporates square ceramic tiles with unique circular nubs which help in proper grip of the...
Features:-
Specially developed rubber compund with ceramic tiles.
Specially designed ceramic tiles with nubs.
Additional 'CN' bonding layer.
Specially developed rubber compund with ceramic tiles.Specially designed ceramic tiles with nubs.Additional 'CN' bonding layer.