This is a modular screening media with unique fixing system that does not require bolting. It is manufactured using specially formulated polyurethane or rubber, and contains at its core, steel reinforcement that is completely encapsulated. The properties of polyurethane and rubber are fully exploited to take care of impact , wear and tear. The steel on the other hand provides the mechanical strength required. The absence of projection ensures the uniform spreading of material actoss the screen, while the high open area with flaring hole design lends itself to higher throughput.

These Polyspan panels are available in various aperture shapes and sizes according to the applications like Dewatering Screens , Anti-clogging Screens etc.

These POLYSNAP Tega MODULAR PANELS have two types of fixing arrangements: a) Pin and Sleeve type b) Button type
Pin and Sleeve type :   The Pin and Sleeve type fixing is the most conventional type fixing of modular panels consisting of Sleeves and Pins, which are fixed by hammering and removed with a screwdriver.
Anti Clogging Panels :   Tega anti clogging Screen decks are used for applications where there are severe clogging problems. The specially designed aperture includes secondary vibrations in deck , thus succesfully solving blinding problem experienced when screening dry , dump or near size particles. They have high open area and are interchangable like all Polysnap panels.
Button type :   This design (No. 176/CAL/2002) of Tega for modlar panels is the latest and most widely accepted in the marketas it removes all the disadvantages of Pin & Sleeve type design of fixing the panels.
Features Benefits No changing of pins & sleeves required. During application, the button remains fully encapsulated. Spares cost goes down, as no spares cost for pins & sleeves. Easy to fit & remove as Tega provides initially the button plate, which can be fixed to frame easily. Downtime loss is reduced. The button plate can be adjusted slightly to ease fitment, which is not possible in pin ∠ sleeve design. No chances of dislodgement of panels. 30% more gripping power than pin & sleeve design. less chances of dislodgement of panels. The edge panels below side fixing bars are also fixed, reducing chances of side panel dislodgement. More life of the Screen. For pin & sleeve - The fixing holes of pin & sleeve design gets enlarged causing the pin & sleeve to come out. No holes in fixing channels, so no chances of sleeve coming out. For pin & sleeve design , if the holes of channel get enlarged - In order to refix the panel, full new channels with drilled holes will be required. Not required for Pin button type design , therefore spares cost reduced.