We have made a commitment to create value for our customers throughout the world by bringing them innovative technologies, products and services in our core business.
Product Details
Skirt Board Sealing System   -   Category:Conveying

Side Skirt Sealing		 Tega innovated the SPILL-EX skirt sealing system, is simple yet effective in making conveyor loading stations completely spillage free.

Rear Skirt Sealing		 Skirt sealing is generally provided on both side of skirt board, however, for conveyors inclined upward or for those handling fines, the sealing of the rear of the belt is neccessary. rear skirt sealing is provided with a fixed length backing plate i.e. based on belt width. The height of the rubber blocks are increased by 100 mm than the standard size of side skirt sealing to compensate for trough height.
To order, select the options mentioned here to suit specific conveyor application. In case your order does not specify these details, supply will be with Standard Model Backing Plate of Type L, using carbon Steel material and Rubber Blocks.
'L' Type: It is used in normal conditions where lump size is more than 30mm. The construction of 'L' type backing plate is shown in the Image. 'I' Type: This type of backing plate consists of an 'I' shaped plate. It is suitable for conveyors with lump size less than 30mm and where tonnage of conveyor belt is high, 'I' type backing plate should be used as shown in the image.
'Z' Type: In this type the backing plate is 'Z' shaped. This type of backing plate are suitable for flat belt conveyors and for the conveyors with divergent type of chute.
Side skirt sealing system at a loading zone of a conveyor belt conveying Lime Stone in a cement plant.
Download RFQ   |   Send RFQ   |   Download Brochure
Application area:-
Loading Zone
Features Benifits
Segmented type soft & special wear resistant rubber block. Fits easily to existing or new conveyor systems & ensure long life.
Segmented rubber block are supported firmly between backing plate & serrated clamp. Soft but firm contact gives complete sealing.
Laterally guided segmented rubber blocks & specially designed serrated clamps. Conforms the lateral movement of the block can be adjusted to the contour of the belt.
Specially developed rubber compound. Ensures smooth running without belt damage.
Individual replaceable blocks. Substantial cost saving.

Specifications:-
Parts & Range of Side Sealing System
Backing Plate Standard(HDS) / Small (LPS) L/Z/I Carbon Steel/SS304
Model Type Material
Rubber Blocks Normal / Heat Resistant
Grade
Clamps & Fasteners Carbon Steel/SS304
Material
Product range:-
Side Skirt Length : Any combination of these size modules to suit your skirt length
  Standard Module (HDS) mm 1500 1200 1050 900 750 600
  Small module (LPS) mm 1000 875 750 625 500  


Rear Skirt Sealing module Selection
  Belt width 600 / 650 750 / 800 1000 1200 1400 1600 1800 2000
  Module length 450 600 750 900 1050 1200 1350 1500